The POE-161 is a Single-Port Mid-Span IEEE 802.3at High Power over Ethernet Injector with maximum up to 30 watts of power output over Ethernet cables. It is designed specifically to fill the demand of the growing higher power required network equipment such as PTZ (Pan Tilt & Zoom) network cameras PTZ Speed Dome color touch-screen / video and voice over IP (VoIP) telephones multi-channel (11a / b / g / n) wireless LAN access points and other network devices that need higher power to function normally. The POE-161 High Power Injector is an ideal solution to delivering data and power to network devices directly via the RJ-45 Port interface without the need of installing extra power outlets and electrical cabling.Quick and Easy High Power PoE Network DeploymentThe POE-161 is a Mid-Span IEEE 802.3at Gigabit High Power over Ethernet Injector which provides DC 56V over Ethernet cables. The POE-161 inserts DC voltage into Cat.5/5e/6 cable allowing the cable between the Injector (POE-161) and Splitter (POE-162S) to transfer data and power simultaneously for up to 100 meters. The POE-161 delivers the Ethernet digital data with power over the twisted pair cables as an IEEE 802.3at Gigabit High Power over Ethernet Injector and the connected IEEE 802.3at Gigabit High Power over Ethernet splitter will spilt the digital data and the power into two selectable DC outputs (12VDC / 24VDC).Cost effective and Easy Cabling InstallationWith IEEE 802.3at Gigabit High Power over Ethernet devices installed the system administrator can use only one single RJ-45 Ethernet cable to carry both power and data to each device. Besides by connecting to the high power PoE splitter POE-162S the POE-161 can offer benefits of cost saving easy networking planning and high reliability. Upon the installation of IEEE 802.3at compliant devices the POE-161 when functioning with the POE-162S can keep the connection while migrating or splitting the power and the Ethernet digital packets. It thus reduces cables eliminates the need for dedicated electrical outlets on the wall ceiling or any unreachable place and most of all reduces installation time. The high Power over Ethernet solution frees the Security IP Camera and wireless AP deployment from restrictions of power outlet locations.
IEEE 802.3at Gigabit High Power over Ethernet Injector (Mid-Span) – 30W
RJ-45 Interface • 2-Port RJ-45 interfaces –1-Port Data + Power output –1-Port Data input • 1 DC 56V input power socketPoE • Complies with IEEE 802.3at Gigabit High Power over Ethernet standard Mid-Span PSE • Provides DC 56V power over RJ-45 Ethernet cable to devices with Ethernet port • Provides PoE power to 1 IEEE 802.3at compliant device • Supports PoE Power up to 30 watts for PoE port • Auto-detects PoE IEEE 802.3at equipment protecting the devices from being damaged by incorrect installation • Remote power feeding up to 100m • IEEE 802.3af Splitter devices compatibleHardware • Plastic case • LED indicators for Power LED and PoE In-useStandard Compliance • IEEE 802.3 10Base-T • IEEE 802.3u 100Base-TX • IEEE 802.3ab 1000Base-T • IEEE 802.3at Power over Ethernet • FCC Part 15 Class A CE